A Guide to Ceramic Tiles Edging & Trimming
Posted on July 12, 2021

If you have chosen to renovate your space with new ceramic tiles, you might be aware of the time and attention this process craves for. You cannot simply cut on the prepping and planning and expect it to look great and survive for years.

In case you are tiling just a small portion, it is important to ensure that the edges and the corners have a great finish just like professionals. An exposed tile edge looks tacky and weak and can easily break.

It is not difficult to install an aluminium tile edging if the technique is right and it supports the surface. For installing a metal tile edging, you need to spread the adhesive first to secure the trim.

For those who are installing an aluminium floor tile edging, the process can be a little bit complicated as it needs to be kept in place with a couple of screws.

ceramic tiles

The preparation stage for ceramic tiles edging & trimming requires a lot more planning than you might have thought. Professionals at Ferreira’s use a lot of tools and materials to keep everything in place.

Materials:

  • Adhesive for ceramic tiles
  • Screws
  • Tile edging
  • Adhesive spreader
  • Trowel

Tools & Equipment

  • Glasses
  • Safety gloves
  • Drill machine
  • Measuring tape
  • Pencil
  • Screwdriver
  • Notched trowel

What is a Tile Trim?

Tile trim is used to give your tiled area a finished look and complete look. They are used to cover the exposed tile edge and give just like any professionals. It is important to take the help of tile trim to complete your tiling job. Tile trim covers all the sharp edges that can cause cuts and be a danger later on.

| Also Read: The Most Common Tiling Jargons And Their Meaning |

How to Choose Your Perfect Tile Trim?

Perfect Tile Trim

You will find four major types of tile edge trim in the market that can be used to finish the installation process. They are ceramic trim, metal trims, plastic trim, and stone trim tiles.

If you are looking for trims to finish your tile edges like a professional, make sure you match the colour and material trim with the actual tile. This needs to be done before the tiling process.

Learn about the size and depth of the trim before starting the process to avoid any future problems. If you match the tile and tile trim, it will give a professional and a finished look.

Types of Trim

There are two major types of tile trims; Plastic and metal strip. These come in various shapes and designs. You can match the colour to give your tile and give a seamless look or can even create a contrast look by pairing it with different coloured ceramic tiles.

How to Cut Your Tile Trim?

You need to cut the trim to fit around the corner of your tile. For windows and doors, you need to create a frame so that it sits around perfectly. To get a clean-cut, it is important to cut the corners at an angle of 45 degrees. This will give a smooth look to the surface.

To cut your points, place the trim in a mitre block and pick which point to cut your trim. For this, we suggest utilizing a lesser hacksaw or something almost identical. Utilizing the helped holes, affirm the point you need to cut your trim at.

Try to check where the slice should be made and saw through your trim, making sure to hold the trim consistent and press it immovably against the edge of your square to guarantee a well put together.

Then, at that point whenever you’ve made 2 cuts at contradicting pointcuts, offer them against the tile, ensuring the two bits of the trim fit together accurately.

In case you’re tiling on a smaller area, for example, a washroom sink splashback or you need to keep away from any sharp edges when arranging your two focuses which can happen when cutting and coating metal trim, you might need to twist your trim around the tile as opposed to making separate cuts.

Start by cutting your tile to measure so it fits perfectly. Measure the trim along the line of one of the uncovered sides of the tile and imprint where it meets the corner. Then, at that point utilizing some trim clips, cut the trim at two restricting 45-degree points.

Then line up your trim again against the tile and curve the trim around the bend of the tile. Proceed to stamp and cut the trim where suitable until you have a total twisting trim completion. What’s more, the writing is on the wall!

| Also Read: A Guide to Porcelain Tiles: How to Cut, Lay, & Clean |

How to Install Tile Edging?

Tile Edging

Taking the help of a professional will help you save a lot of time and energy. However, if you wish to do it by yourself, you will need tile trims to give it a finished look.

With regards to introducing your tile trim, blend your glue and utilizing an indented scoop, apply your glue as you typically would, explicitly to the space where you will be applying your trim.

Then, at that point drive your trim into the bed of the glue, along the edge of your space, ensuring the trim is held into the spot with the cement.

At long last, proceed to lay your tile onto the surface, trying to apply the glue to the rear of the tile too prior to applying it to the trim to guarantee a solid connection among tile and trim.

If this is a region that is probably going to get wet, like a shower speciality, you will need to guarantee that there is a 2mm hole between the trim and the tiled edge. This will empower you to appropriately grout the space, guaranteeing they are more watertight and keep away from any additional danger of water getting in the middle of your trim and tile.

| Also Read: Understanding the Different Types of Tiles: Wall, Floor, Bathroom, & Roof |

Bottom Line

Ceramic tile edging and trimming can get a bit tricky if done without the help of a professional. At Ferreira’s, you can get your hands on the best ceramic trim and tile along with experts. This will make your renovation smooth and also save a lot of your time. Check out their range of trim to match your existing tiles!