Guide on Tile Installation on Roof, Walls And Floors
Posted on September 24, 2021

Tiles really help in adding aesthetic as well as durability to your wall, roof or floors. Regardless of where you are performing the process, you should definitely follow the standards to accomplish a strong, appealing gander toward the finish of your repair project. The tile installation process will take you around and help you understand how to tile the two dividers and floors and answer normal inquiries. For example, which would be a good idea for you to tile first and which gear do you need? To begin, let’s understand where you need to install tiles to make your work a bit easier.

How to Install Tiles on Roofs, Walls & Floors?

How to Install Tiles

Tile installation requires a lot of brainstorming about what will work for the space and how to make it look as per everyone’s taste. We will assist you on how you can ease the overall tile installation process!

Plan Your Design

You know the area and location pretty well when renovating or refurbishing the space. To amp the look, you need tiles that look pleasing as well as add strength to the space. For your first step, you need to settle on the design. It should match the location as well as your taste. Consider the look you desire to accomplish and regardless of whether this includes finished tiles, mosaics or shine, then, at that point, contemplate the best sort of tiles for the room. For instance, more solid tiles are fit for kitchen splashbacks, and you’re probably going to pick more quiet tones for restrooms and wetrooms. You can get various design options in porcelain tiles from the best tile producers in the UK.

Prep the Area

laying tiles

In case you are laying tiles on the existing ones, you will have to make sure that the area is free from any damage or mould. These damages can be healed by applying a water patching compound. If you pick to lay your tiles on wood, make sure that the subfloor is at least 1.5 inches thick. Get rid of grease, oil dust, sealer and anything accumulated on the surface by either sanding, chipping away or scraping the moulds.

| Also Read: A Step-by-Step Guide: How to Remove Old Floor Tile? |

Lay the Tiles

Lay the Tiles

To make the tiles look good on the install surface, it is important to lay them in a nice manner. It needs to be placed in a straight line. Get your tools ready as you are definitely going to need them in this step. You need to be really careful when laying the tiles. Depending on the room and space available, the configuration process can be different from what you usually see. Once you are satisfied with the process, move to the next step.

Mortar Mixing

Begin by storing your mortar material at a temperature between 50-70 degrees Fahrenheit. Mix it with water until you get your desired consistency. It should not be too watery or thick. Depending on the type of mortar mix you have used, water will take time to react. Remember to use this solution within 30 minutes of mixing it. Do not mix more water to the mix when you are using it as water can weaken the mix strength.

Applying Mortar

Once your mix is ready, it’s now time to apply it. Make sure to apply mortar using the flat side of the trowel first. Use the recommended notch trowel by applying it at a 45- degree angle. Spread the mortar mix uniformly.

Installing the Tiles

Press your desired tile unto the mortar with a twist motion. Hit it with a rubber mallet so it can stick to the mortar firmly. Let the mortar dry for at least 24 hours. Ensure that no one accidentally steps on the tiles. With the help of a tile spacer, check if there is uniformity among the tiles or not. Remove any excess adhesive from the tiles.

Cut Tile Wherever Required

Cut Tile

If your tiles need any cutting, with the help of a wet saw or a nipper, cut it. Avoid touching the centrepiece of a tile. This step need not be perfect if a cover is going to be installed on top of it.

Grout Tiles

As per the manufacturer’s instructions, mix grout until it has a smooth consistency. It needs to be applied within 20 minutes so mix accordingly. Let it stand for 5 minutes and mix it again. Now use the mixture to apply in the joints after the spacers have been removed. After 30 minutes buff the tile joint with the help of a dry cloth.

| Also Read: How to Clean Grout Between Floor and Wall Tiles? |

Optional Step

Sealing the grout is completely optional. For the best result, seal the grout after 72 hours of application. Sealing helps in keeping up the colour of the grout. It also helps in avoiding any water seeping inside the tiles.

Bottom Line

Tile installation needs proper guidance as it is a huge investment. Getting help from professionals is always recommended to avoid any damage or mishaps. If you have prior experience in tile installation, you can definitely try it out all by yourself. Check out the best tile brands and websites to see which one works best for you and the location.