A Step-by-Step Guide: How to Remove Old Floor Tile?
Posted on August 30, 2021

Do you know what’s the toughest job while remodelling or renovating your place? Removal of old floor tiles. Apart from being a tough job, it is a pretty expensive one too. Rather than spending a heavy amount, it is easy to learn how to remove old floor tiles all by yourself. However, we recommend you take proper safety precautions before performing the tile removal process. Make sure you have all the safety equipment in place!

Equipment Required For Old Tile Removal

During this process, you can buy a floor scraper and an angled steelhead. These tools come in handy when dislodging the old floor tiles from the adhesive. There are a few safety equipment that you will need to prevent any injury. Keep a handheld chisel, paint scraper, safety glasses, leather gloves, dust mask, and drop sheet ready.

In case you are stuck with any equipment or feel a bit lost during the process, get help from professionals in the UK.

How To Remove Old Floor Tiles: Step by Step Guide

Eliminating floor tile can be a troublesome and tedious task, and the difficulties frequently stay covered up until the process is complete. Depending upon the construction, the tile might be attached to exposed concrete, a pressed wood or bricklayer board underlayment or even attached to a formerly installed floor. Whatever lies underneath, needs to be removed along with the pre-installed floor tileset.

Stage 1: Remove installations 

Remove installations

Vacate the room and remove any installation in a way that might hinder the method involved with the removal of old floor tile. If it is near a washbasin or bathroom area, disconnect your supply to ease the process.

Stage 2: Find the beginning stage 

In case the tile was installed around a vanity or other semi-long-lasting heavy machinery or equipment, cover it with an uncovered edge before you start the tile removing process. In case the tile is one end to the other, it is essential to utilize a mallet and etch to break out a tile to start up with the starting point of the installation process. Tiles might be fixed using glues or mortar and may come up effectively or require exertion, contingent upon how they were attached and the kind of underlayment used. With the help of a hammer, break it down to eliminate tiles.

| Also Read: Everything You Need to Know About Tile Adhesive |

Stage 3: Get rid of the tile 

Get rid of the tile

From the beginning stage, keep on pulling up tiles. Store the tiles in a garbage bin or in a pile to limit the mess in the area. Recollecting the tile can be heavy, and an overloaded waste container will be hard to pull away.

Stage 4: Access Underlayment 

Since the tiling has been connected now to a substantial floor or subfloor, a pressed wood underlayment is required. An unseemly or harmed underlayment ought to be eliminated, however, some of it can be reused efficiently. Access the underlayment and remove it to uncover the sub-floor, if required.

Stage 5: Clear trash 

Clear trash

With the help of a brush or a vacuum cleaner get rid of all trash off of the floor. Make sure the floor does not have any particles left or it can cause injury or discomfort in upcoming steps.

Stage 6: Remove any visible nails 

If you have removed the surface completely, it might very well be essential to get rid of any nails that are present on the surface. Be extremely careful while removing them from the floor to avoid any injury. If by any chance you get a cut, make sure to get medical help as soon as possible.

Stage 7: Inspect floor 

When you have got rid of the floor tiles, examine the subfloor for chips or damage that might be fixed before another floor is installed. Fix or replace any bad wood or divots in substantial floors. The subfloor needs to be smooth and harm-free before another floor is installed.

FAQs

remove old floor tiles

There can be various questions on how to remove old floor tiles. We are answering some of the most common questions here:

How to remove stubborn old tile?

To get rid of very old and stubborn tile, start the process by breaking it with a hammer. Hit the centre of the tile and it will break. Now with the help of the chisel, chip out the rest of the tiles.

How do you remove old floor tile adhesive?

Hammer on a 2-to-3 foot square section and smash up the remaining adhesive. With the help of a floor scraper, get rid of the broken pieces of adhesive from the floor.

Is it okay to tile over tile?

You can easily tile over the tile as long as it is a sound surface. Make sure the existing surface is free from mold and mildew. Check the grout as well.

 

Bottom Line

If not done correctly, removing old floor tiles can be very challenging and annoying. With our guide on ‘how to remove old floor tiles’, you can remove them all by yourself. Make sure you take safety precautions to avoid any injuries as it is common during such a process. Refer to a professional if you find it difficult to complete. Ferreira’s service is always available for its customers.